Guides
Snapmaker 2.0 CNC G-code Guide: Reading What Luban Outputs
The Snapmaker 2.0 runs CNC G-code generated by Luban on Marlin-based firmware. Here is how to read it, the codes it uses, and how to verify before you cut.
Lawrence Arya··10 min
Guides
Why Does My CNC Router Cut Air? Causes and Fixes
A CNC router cutting air almost always means the Z zero, the work origin, or the units are wrong. Here is how to diagnose each cause and fix it before you waste stock.
Lawrence Arya··10 min
Practice
Langmuir MR-1 CNC Programming Basics: The Workflow That Fits
The Langmuir MR-1 runs posted CAM programs through Langmuir's own control software: the CAM-first workflow, the standard core that transfers, and the edges.
Lawrence Arya··3 min