Guides
Lathe Taper Calculation for G-Code: Formulas and a Worked Pass
Taper turning in G-code is two diameters and a Z length: program both X ends and let G01 interpolate. The formulas, a worked example, and the comp trap.
Lawrence Arya··6 min
Guides
Differenza tra G00 e G01 nel CNC: rapido contro avanzamento
G00 sposta l'utensile in rapido, fuori dal materiale; G01 taglia in linea retta all'avanzamento programmato. Confonderli è l'errore più caro del principiante.
Lawrence Arya··5 min
Guides
Verschil tussen G00 en G01 bij CNC: ijlgang of voeding
G00 verplaatst het gereedschap in ijlgang, buiten het materiaal. G01 verspaant in een rechte lijn op voedingssnelheid. Wie ze verwisselt, riskeert een crash.
Lawrence Arya··4 min
Guides
How to Calculate Feed Rate for G01 (Beginner Guide)
The F value on a G01 line is feed rate, and you calculate it from spindle speed, feed per tooth, and the number of flutes. Here is the formula with a worked example.
Lawrence Arya··5 min
Guides
Why Did My End Mill Break on G01? Common Causes
An end mill usually breaks on a G01 feed move from overload: too much feed, too deep a cut, a straight plunge, or a wrong speed. Here are the causes and fixes.
Lawrence Arya··4 min
Code reference
G00 vs G01: Rapid vs Linear Feed, Explained for Beginners
G00 is a rapid positioning move and G01 is a controlled linear feed move. Here is the difference, why beginners mix them up, and how to keep them straight.
Lawrence Arya··5 min