G-Code Sprint Back to site
G-code basics archive

All posts.

523 posts · page 4 of 44.

Posts, page 4 of 44

Code reference

Common M-codes for the XYZ ProtoTRAK Control

The ProtoTRAK is mainly conversational, but it uses standard M-codes for the spindle, tool change, coolant, and program stops. Here are the common ones and what they do.

Lawrence Arya··10 min
Guides

Como ler um programa CNC linha por linha

Ler um programa CNC fica simples quando você lê em blocos, não palavra por palavra. Veja a estrutura, o que cada código significa e como ganhar fluência.

Lawrence Arya··10 min
Guides

Do CAM Programmers Need to Know Manual G-code?

Yes. CAM writes most of the code, but programmers still read it daily and hand-edit at the machine. Manual G-code is what separates a setter from a button pusher.

Lawrence Arya··10 min
Guides

Do I Need to Know G-code If I Use Mastercam?

You do not need to hand-write G-code to run Mastercam, but you do need to read it well enough to verify and fix what the post processor outputs.

Lawrence Arya··11 min
Guides

How to Learn CNC Programming in Prison

G-code is a small, fixed vocabulary you can master with printed references and active recall, even with limited internet. Here is a realistic path.

Lawrence Arya··10 min
Guides

How to Manually Edit Mastercam G-code Safely

You can hand-edit posted Mastercam code in Code Expert or a text editor, but the durable fix is the post or toolpath. Edit only the value, keep the block, re-verify.

Lawrence Arya··10 min