Guides
Shapeoko CNC Router G-Code: What to Practice
A Shapeoko runs a friendly G-code subset through GRBL. Here is what to practice so you can read and tweak the programs your CAM software generates.
Lawrence Arya··5 min
Practice
Shop-Floor G-Code Reference vs Recall: Which Do You Need?
A reference app looks codes up; recall practice means you do not have to. Here is the difference, and why beginners are better served by drilling than by another lookup app.
Lawrence Arya··5 min
Practice
SkillsUSA CNC Milling: How to Practice for the Contest
SkillsUSA CNC milling rewards speed and accuracy under pressure. Here is how to prepare, starting with the code fluency that lets you read and write fast.
Lawrence Arya··5 min
Practice
Swipe Flashcards for CNC Codes on Android: Do They Work?
Swipe-style flashcards make practice quick and thumb-friendly, but the swipe is not what teaches. Here is what actually matters in a CNC flashcard app.
Lawrence Arya··5 min
Practice
TAFE CNC Machining Practice Test: How to Prepare
TAFE CNC machining is competency-based: you are assessed on doing the task. Here is how to prepare for the practice tests, starting with code recall.
Lawrence Arya··5 min
Practice
TESDA CNC Lathe: How to Practice for the Assessment
A TESDA CNC lathe assessment is competency-based: reading a turning program, setup, and producing a part. Here is how to practice, lathe codes first.
Lawrence Arya··5 min
Practice
Trade Test Prep for a CNC Setter (South Africa)
A South African CNC setter trade test checks practical skill: reading a program, setting offsets, tooling, and producing a part. Here is how to prepare, codes first.
Lawrence Arya··5 min
Guides
Typing Test for CNC Programmers: Speed and Accuracy
Programmers who edit code at the control need accurate, fast typing, because a wrong digit is a scrapped part or a crash. Here is how to practice it.
Lawrence Arya··5 min
Practice
VMC Operator to Programmer: A Free Path to Level Up
Moving from running a VMC to programming it is a real pay jump. Here is a free, self-directed path, starting with the G-code fluency every programmer needs.
Lawrence Arya··5 min
Practice
What G-Code Is on the NIMS CNC Mill Test? The Likely Scope
The G-code a NIMS CNC milling credential expects is the standard mill set: motion, plane and units, offsets, compensation, and basic canned cycles. Here is the list to study.
Lawrence Arya··5 min
Practice
What to Expect in a CNC Setup Interview
A setup-focused interview often moves to the machine: explain a program, set an offset, talk through a tool change. Here is how it tends to flow and how to prepare.
Lawrence Arya··5 min
Guides
Why Did My CNC Crash on G00? Common Beginner Causes
A G00 rapid moves at full speed, so a wrong offset, tool length, or start point turns a small mistake into a crash. Here are the usual causes, explained for learners.
Lawrence Arya··5 min