Guides
G-codes uit je hoofd leren: de methode die blijft hangen
G-codes uit je hoofd leren lukt niet met stampen, wel met ophalen: groepjes per functie, ezelsbruggetjes voor de verwisselparen en korte dagelijkse testrondes.
Lawrence Arya··4 min
Posts, page 21 of 44
Code reference
G02とG03の違いをわかりやすく：円弧の向きで迷わない方法
G02は時計回り、G03は反時計回りの円弧補間です。判定の向きはプレーンの正の軸から見ること。覚え方、IとJの指定、旋盤での注意までまとめました。
Lawrence Arya··1 min
Guides
G112/G113 Polar Coordinate Interpolation on Fanuc, Demystified
G112 maps the lathe's X and C axes onto a virtual flat plane so live tooling can mill contours on a face: how the mapping works, reads, and gets cancelled.
Lawrence Arya··5 min
Practice
G12 and G13 Circular Pocket Milling on Haas: How to Read Them
G12 and G13 are Haas-specific circular pocket cycles: one block mills a round pocket CW or CCW. What the words mean, and the portable helical way underneath.
Lawrence Arya··5 min
Guides
G68.2 Tilted Working Plane on Fanuc: Reading 3+2 Programs
G68.2 declares a tilted coordinate frame so 3+2 work programs like flat 3-axis milling on an angled face: the frame logic, the bracket discipline, and the hedges.
Lawrence Arya··5 min
Code reference
GRBL Supported G-Codes List: What the Firmware Actually Runs
GRBL implements a documented subset of standard G-code: full motion and offsets, no canned cycles or macros. The list, the omissions, and what they mean.
Lawrence Arya··5 min
Code reference
GSK 980TDb Lathe G-Code List: The Fanuc-Shaped Budget Answer
The GSK 980TDb speaks a largely Fanuc-compatible lathe dialect: standard motion, G96/G50, G71-class cycles. The list framework, plus where the manual rules.
Lawrence Arya··4 min
Guides
Haas VF-2 Basic Setup Codes: The Sequence Behind the Buttons
Setting up a Haas VF-2 runs on the standard vocabulary: offsets, tool lengths, MDI checks, with Haas dialect at the edges. The setup sequence, code by code.
Lawrence Arya··5 min
Guides
Heidenhain ISO Programming Simulator: The Honest Options Map
Heidenhain's own programming-station software is the real TNC simulator, licensed and PC-based. For the ISO layer itself, free tools cover most of the practice.
Lawrence Arya··4 min
Code reference
Heidenhain vs Fanuc bij frezen: de verschillen op een rij
Heidenhain programmeert in dialoogvorm (Klartext), Fanuc in klassieke ISO-g-code. Wat dat betekent voor leren, mbo en je eerste baan, met een duidelijk advies.
Lawrence Arya··4 min
Practice
How to Generate G-Code Using Python: A Working Walkthrough
Generating G-code with Python is f-strings plus discipline: a formatter that never emits garbage, header and footer templates, and a feature loop. Full example inside.
Lawrence Arya··5 min
Guides
How to Loop a G-Code Program With M99: Three Honest Patterns
M99 loops programs three ways: at a main program's end for continuous runs, with M98 L-counts for repeats, and with macro counters for controlled cycles.
Lawrence Arya··5 min